Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 90)

Overview of alarms 06/2009

NCK alarms

2-90

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Interface signals are set.

Alarm display.

Remedy: Enter tool clearance for the double turret head in the SD42162

$SC_EXTERN_DOUBLE_TURRET_DIST.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12730 [Channel %1: ] Block %2 no valid transformation machine data

parameterized

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The machine data MD24100 $MC_TRAFO_TYPE_1, MD24110 $MC_TRAFO_AXES_IN_1[1],

MD24210 $MC_TRAFO_AXES_IN_2[1] are incorrectly set for G07.1, G12.1.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Enter valid transformation identifier for TRACYL in MD24100 $MC_TRAFO_TYPE_1 and the rotary

axis number in MD24110 $MC_TRAFO_AXES_IN_1[1] or MD24210 $MC_TRAFO_AXES_IN_2[1].

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12740 [Channel %1: ] Block %2 modal macro call %3 not possible

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Source string

Definitions: When calling a modal macro no other modal macro, modal cycle or modal subroutine may be active.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14000 [Channel %1: ] Block %2 illegal end of file

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm 14000 is output in the following situations:

- Parts program was not terminated with M30, M02 or M17.

- Executing from external: Download was aborted (e.g. because HMI was switched off).

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: - End parts program with M30, M02 or M17 and start parts program.

- Executing from external: If the download for the selected program was aborted,

the default program _N_MPF0 is automatically selected with RESET

The selection of the user program must be repeated after that.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

14001 [Channel %1: ] Block %2 illegal end of block

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: After system-internal data manipulation (e.g. when reloading from an external source) a part file can

end without having LF as the last character.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 90

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl