Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 212)

Overview of alarms 06/2009

Cycle alarms

2-212

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61192 [Channel %1: ] Block %2: second 5 axis transformation not set up

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE832.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61193 [Channel %1: ] Block %2: compressor option not set up

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE832.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61194 [Channel %1: ] Block %2: spline interpolation option not set up

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE832.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61196 [Channel %1: ] Block %2: no swiveling in JOG --> 5 axis transformation

and TCARR simultaneously activated

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: 5-axis transformation and TOOLCARRIER activated at the same time.

Alarm triggered by following cycles: CYCLE800.

Remedy: 5-axis transformation and TOOLCARRIER activated at the same time.

61197 [Channel %1: ] Block %2: no swiveling in JOG --> active WO G%4 and

basic frames contain rotations

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycles: CYCLE800.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 212

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl