Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 273)

Cycle alarms

06/2009 Overview of alarms

2-273

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62501 [Channel %1: ] Block %2: Speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE446

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62502 [Channel %1: ] Block %2: Dresser %4, GWPS has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check limit value for GWPS and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62503 [Channel %1: ] Block %2: Dresser %4, speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62900 [Channel %1: ] Block %2: Incorrect source file

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62901 [Channel %1: ] Block %2: Source file not available

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62902 [Channel %1: ] Block %2: Not yet implemented

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62903 [Channel %1: ] Block %2: Incorrect contour

Parameters: %1 = Channel number

%2 = Block number, label channel number

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 273

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl