Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 256)

Overview of alarms 06/2009

Cycle alarms

2-256

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61708 [Channel %1: ] Block %2: internal cycle error with READYPROG at HMI

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycles: CYCLE950, CYCLE73, CYCLE74, CYCLE75.

Remedy: --

61709 [Channel %1: ] Block %2: Timeout in contour calculation

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61710 [Channel %1: ] Block %2: Stock removal program not available

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61711 [Channel %1: ] Block %2: Name of stock removal program missing

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61712 [Channel %1: ] Block %2: Tool parameter for machining direction not

defined

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61720 [Channel %1: ] Block %2: Incorrect parameter input.

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61721 [Channel %1: ] Block %2: Error contour direction cannot be determined

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 256

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl