Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 234)

Overview of alarms 06/2009

Cycle alarms

2-234

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61322 [Channel %1: ] Block %2: Check 4th number of _KNUM

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The specified position of _KNUM includes invalid values. Also check _MVAR.

Alarm is triggered: CYCLE974, CYCLE977, CYCLE978, CYCLE979, CYCLE994, CYCLE998,

CYCLE114.

Remedy: Check parameter _KNUM, _MVAR.

61323 [Channel %1: ] Block %2: Check 5th number of _KNUM

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The specified position of _KNUM includes invalid values. Also check _MVAR.

Alarm is triggered: CYCLE974, CYCLE977, CYCLE978, CYCLE979, CYCLE994, CYCLE998,

CYCLE114.

Remedy: Check parameter _KNUM, _MVAR.

61324 [Channel %1: ] Block %2: Check 6th number of _KNUM

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The specified position of _KNUM includes invalid values. Also check _MVAR.

Alarm is triggered: CYCLE974, CYCLE977, CYCLE978, CYCLE979, CYCLE994, CYCLE998,

CYCLE114.

Remedy: Check parameter _KNUM, _MVAR.

61325 [Channel %1: ] Block %2: Check measuring axis/auxiliary measuring axis

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Parameter for metering shaft _MA has an incorrect value.

Alarm is triggered by: all measuring cycles except for CYCLE979.

Remedy: Check parameter _MA.

61326 [Channel %1: ] Block %2: Check measuring direction

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Parameter for measuring direction _MD has an incorrect value. Alarm is triggered: CYCLE973,

CYCLE976.

Remedy: Check parameter _MD.

61327 [Channel %1: ] Block %2: Program reset required

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: NC reset required.

Alarm is triggered: all measuring cycles except for CYCLE973, CYCLE976.

Remedy: Execute NC reset.

61328 [Channel %1: ] Block %2: Check D number

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: D number in parameter _KNUM is 0.

The alarm can be triggered by all measuring cycles.

Remedy: Check parameter _KNUM.

61329 [Channel %1: ] Block %2: Check rotary axis

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No name assigned to the axis number specified under parameter _RA or axis not configured as rotary

axis. Alarm is triggered: CYCLE998.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 234

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl