Siemens SINUMERIK 802D sl Manual do Operador descarregar pdf (Página 258)

Overview of alarms 06/2009

Cycle alarms

2-258

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Remedy: --

61731 [Channel %1: ] Block %2: Internal error: floating point exception

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61732 [Channel %1: ] Block %2: Internal error: invalid instruction

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61733 [Channel %1: ] Block %2: Internal error: Floating_Point_Error

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61734 [Channel %1: ] Block %2: Cutting edge not compatible with cutting

direction

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61735 [Channel %1: ] Block %2: Finished part not within blank contour

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: Check blank contour definition.

61736 [Channel %1: ] Block %2: Insert length of tool < machining depth

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61737 [Channel %1: ] Block %2: Machining_cutting_depth > tool nose radius

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61738 [Channel %1: ] Block %2: Machining_cutting_depth < tool nose radius

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61739 [Channel %1: ] Block %2: Wrong insert position of tool for this machining

operation

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 339 340

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Manual do Operador Página 258

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl