Siemens HydroRanger 200 Manual de Instruções descarregar pdf (Página 94)

Page 80 HydroRanger 200 – INSTRUCTION MANUAL 7ML19981FC01

mmmmm

Testing the Configuration

The effect of the ARROW key is determined by the state (rate of rise or fall) immediately

before the key is pressed.

When the level rises to 100% or falls to 0%, it reverses direction at the same rate.

Checking Volume Characterization

To confirm universal volume calculations (P050 = 9, 10) are correct:

1. Go to P920

2. Key in a level associated with a known volume

3. Press ENTER

4. Check the returned volume against the manufacturer’s chart

5. Change parameters P054 and P055, as required

6. Repeat steps 2 to 5 until the volume curve is verified

Checking OCM Flow Characterization

To confirm universal flow calculations (P600 = 4, 5) are accurate:

1. Go to P925

2. Enter a level with a known flow

3. Press ENTER

4. Check the returned flow against the manufacturer’s chart

5. Change parameters P610 and P611, as required

6. Repeat steps 2 to 5 until the flow curve is verified

Action State (prior to pressing key) Effect

Press

Stop Rise at 1% of Span / second

Rise at 1% of Span / second Rise at 4% of Span / second (max.)

Rise at 4% of Span / second (max.) No effect

Fall at 1% of Span / second Stop

Fall at 4% of Span / second Fall at 1% of Span / second

Press

Stop Fall at 1% of Span / second

Rise at 1% of Span / second Stop

Rise at 4% of Span / second (max.) Rise at 1% of Span / second

Fall at 1% of Span / second Fall at 4% of Span / second (max.)

Fall at 4% of Span / second (max.) No effect

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 255 256

Sem comentários

Siemens HydroRanger 200 Manual de Instruções Página 94