Siemens SINUMERIK 802D sl Especificações descarregar pdf (Página 301)

Cycle alarms

06/2007 Overview of alarms

2-301

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61269 Channel %1 block %2: External tool diameter too small

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Incorrect tool definition.

Alarm triggered by following cycle: CYCLE61.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check angle and diameter of the tool used.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61270 Channel %1 block %2: Chamfer width too small

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Chamfer width selected too small.

Alarm triggered by the following cycles: E_SP_CHA, F_SP_CHA.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Increase the chamfer width.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61271 Channel %1 block %2: Chamfer width > tool radius

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Chamfer width larger than tool radius.

Alarm triggered by following cycles: E_SP_CHA, F_SP_CHA.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Use a larger tool.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61272 Channel %1 block %2: Insertion depth too small

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Insertion depth on chamfering too small.

Alarm triggered by following cycles: E_SP_CHA, F_SP_CHA.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Increase the insertion depth.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 391 392

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Especificações Página 301

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl