Siemens SINUMERIK 802D sl Especificações descarregar pdf (Página 148)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-148

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

14800 Channel %1 block %2 programmed path speed less or equal to zero

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: A negative F value has been programmed in conjunction with the G functions G94, G95 or G96. The

path velocity may be programmed in the range 0.001 to 999 999.999 [mm/min, mm/rev, deg/min,

deg/rev] for the metric input system and 0.000 1 to 39 999.999 9 [inch/min, inch/rev] for the inch input

system.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Program the path velocity (geometric sum of the velocity components of the geometry axes involved)

within the limits given above.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14810 Channel %1 block %2 negative axis speed programmed for positioning

axis %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis

Definitions: A negative feed (FA value) has been programmed for the displayed axis presently operating as a posi-

tioning axis. The positioning velocity may be programmed in the range 0.001 to 999 999.999 [mm/min,

deg/min] for the metric input system and 0.000 1 to 39 999.999 9 [inch/min, inch/rev] for the inch input

system.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Program the positioning velocity within the limits given above.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14811 Channel %1 block %2 incorrect value range for acceleration of

axis/spindle %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis, spindle

Definitions: A value outside of the permissible input range of the programmed acceleration has been used. Values

of between 1 and 200 % are possible.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Adjust the value range in accordance with the Programming Guide.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14812 Channel %1 block %2 SOFTA not available for axis %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis

Definitions: SOFT is to be set as type of motion control for an axis. This is not possible because a bent acceleration

characteristic has been selected for this axis via machine data.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change the part program or change the machine data.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 391 392

Siemens SINUMERIK 802D sl Especificações Página 148

Comentários a estes Manuais

Siemens SINUMERIK 802D sl Especificações Página 148

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl