Siemens SINUMERIK 802D sl Especificações descarregar pdf (Página 214)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-214

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

18101 Channel %1 block %2 invalid value assigned to FXST[]

Parameters: %1 = channel number

%2 = block number, label

Definitions: Only the range 0.0 - 100.0 is valid at the present time.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18102 Channel %1 block %2 invalid value assigned to FXSW[]

Parameters: %1 = channel number

%2 = block number, label

Definitions: Only positive values including zero are valid at the present time.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18300 Channel %1 block %2 frame: fine shift not possible

Parameters: %1 = channel number

%2 = block number, label

Definitions: Allocation of a fine offset to settable frames or the basic frame is not possible since MD 18600

MM_FRAME_FINE_TRANS is not equal to 1.

Reaction: Interpreter stop

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Modify program or set MD 18600

MM_FRAME_FINE_TRANS to 1.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

18310 Channel %1 block %2 frame: illegal rotation

Parameters: %1 = channel number

%2 = block number, label

Definitions: Rotations are not possible with global frames.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

18311 Channel %1 block %2 frame: illegal instruction

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt was made to read or write a frame which does not exist.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 391 392

Comentários a estes Manuais

Sem comentários

Siemens SINUMERIK 802D sl Especificações Página 214

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl