Siemens SINUMERIK 802D sl Especificações descarregar pdf (Página 174)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-174

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Example:

N100 G33 Z400 K2; Thread lead 2 mm, thread

: end Z=400 mm

N200 SPOS=0; Transfer spindle to axis operation

N201 G90 G331 Z-50 K-2; Tapping at Z=-50, counter-clockwise rotation

N202 G332 Z5; Retraction, automatic direction reversal

N203 S500 M03;Spindle reverts to spindle operation

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Specify geometry axis and corresponding interpolation para-

meters.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16746 Channel %1 block %2 spindle %3 selected gear stage %4 not installed

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Spindle number

%4 = Gear stage

Definitions: The first gear stage data block is active. The required gear stage is not installed in the 1st gear stage

data block. The number of gear stages installed is configured in machine data 35090

$MA_NUM_GEAR_STEPS.

Examples of the occurrence of the alarm with 3 three gear stages installed (MD 35090

$MA_NUM_GEAR_STEPS = 3):

* ... M44 or M45 has been programmed for the spindle concerned

*...M70 has been programmed and machine data 35014 $MA_GEAR_STEP_USED_IN_AXISMODE

is larger than 3.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program: Only those valid gear stages can be entered which have also been installed

according to machine data MA_NUM_GEAR_STEPS.

Limit M70 configuration (MD 35014 $MA_GEAR_STEP_USED_IN_AXISMODE) to MD 35090

MA_NUM_GEAR_STEPS.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16747 Channel %1 block %2 spindle %3 inserted gear stage %4 for tapping not

installed

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Spindle number

%4 = Gear stage

Definitions: The second gear stage data block has been activated for tapping with G331.

However, the current gear stage has not been installed in the second gear stage data block. The num-

ber of gear stages installed is configured in machine data 35092 NUM_GEAR_STEPS2. The gear

stage cannot be changed in traversing blocks. The gear stage appropriate for the speed must be

loaded before the traversing block.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Procedure for automatically engaging the suitable gear stage prior to thread cutting:

* Program the spindle speed (S) in a G331 block without axis motions and prior to thread cutting, e.g.

G331 S1000.

* Activate M40 for the spindle.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 391 392

Siemens SINUMERIK 802D sl Especificações Página 174

Comentários a estes Manuais

Siemens SINUMERIK 802D sl Especificações Página 174

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens SINUMERIK 802D sl