Siemens IEEE802.11 Instruções de Operação descarregar pdf (Página 55)

Configuring with Web Based Management

5.3 "Wizard" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

Description

The page contains the following boxes:

●

"Telnet Server" check box

Enable or disable the "Telnet Server" service for unencrypted access to the CLI.

●

"SSH Server" check box

Enable or disable the "SSH Server" service for encrypted access to the CLI.

●

"HTTPS Server only" check box

Enable or disable access using HTTPS.

●

"DCP Server"

drop-down list

Specify whether or not the device can be accessed with DCP (Discovery and

Configuration Protocol):

– "-" (disabled)

DCP is disabled. Device parameters can neither be read nor modified.

– Read/Write

With DCP, device parameters can be both read and modified.

– Read-Only

With DCP, device parameters can be read but cannot be modified.

●

"SNMP" drop-down list:

Select the protocol from the drop-down list. The following settings are possible:

– "-" (SNMP disabled)

Access to device parameters via SNMP is not possible.

– SNMPv1/v2c/v3

Access to device parameters is possible with SNMP versions 1, 2c or 3. You can

configure other settings in "System > SNMP > General".

– SNMPv3

Access to device parameters is possible with SNMP version 3. You can configure

other settings in "System > SNMP > General".

●

"SNMPv1/v2 Read-Only"

check box

Enable or disable write access to SNMP variables with SNMPv1/v2c.

● "

SINEMA Configuration Interface

" check box

If the SINEMA configuration interface is enabled, you can download configurations to the

device via the TIA Portal.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 291 292

Comentários a estes Manuais

Sem comentários

Siemens IEEE802.11 Instruções de Operação Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Siemens IEEE802.11