Siemens IEEE802.11 Instruções de Operação descarregar pdf (Página 265)

Configuring with Web Based Management

5.10 "iFeatures" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

265

–

Next Channel

The client scans the next channel from its permitted channel list. If an access point is

there, it connects to it. If it does not find an access point on this channel, it scans the

next channel.

●

Signal Quality Threshold

Can only be edited if "Scanning Mode" "Next Channel" is enabled. The client is given a

minimum signal strength with which the access point must be seen during the scan so

that a connection can be established to it.

The following threshold values exist for the signal strength:

Level

Signal quality in RSSI

Signal quality in %

4 35 70

Procedure

1. Select the "Enable iPCF" option for the required WLAN interface.

2. Select the required cycle time from the "iPCF Cylce Time [ms]" drop-down list.

3. Select for example "All Channels" from the "Scanning Mode"drop-down list.

4. Click the "Set Values" button

You configure the security settings in "Security > WLAN > Basic".

Client mode

You use a client or an access point in client mode.

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 291 292

Sem comentários

Siemens IEEE802.11 Instruções de Operação Página 265