Siemens IEEE802.11 Instruções de Operação descarregar pdf (Página 266)

Configuring with Web Based Management

5.10 "iFeatures" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

266 Configuration Manual, 11/2014, C79000-G8976-C323-03

Description

The table has the following columns:

●

Radio

Specifies the WLAN interface to which the settings relate.

●

Enable iPCF

Enable or disable iPCF mode. For PNIO communication, we recommend that you enable

the iPCF mode. By enabling iPCF, the data rates provided by the access point are

adapted.

Procedure

1. Select the "Enable iPCF" option for the required WLAN interface.

2. Click the "Set Values" button

You configure the security settings in "Security > WLAN > Basic".

5.10.2

iPCF-MC

Requirements to be able to use iPCF-MC:

● The access point has at least two WLAN interfaces (dual AP).

● Access point mode: Only dual APs with KEY-PLUG W780 iFeatures (MLFB 6GK5 907-

8PA00)

● Client mode: Client with KEY-PLUG W740 iFeatures (MLFB 6GK5 907-4PA00)

● The management interface and data interface must be operated in the same frequency

band and mode and must match in terms of their wireless coverage. iPCF-MC will not

work if both wireless interfaces are equipped with directional antennas that cover different

areas.

● The management interfaces of all access points to which a client can change must use

the same channel. A client scans only this one channel to find accessible access points.

● Transmission based on IEEE801.11h (DFS) cannot be used for the management

interface. 801.11h (DFS) is possible for the data interface.

● The client cannot be operated with "Use Allowed Channel only".

● "Force roaming on Ethernet down" is automatically mirrored on the second interface.

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 291 292

Sem comentários

Siemens IEEE802.11 Instruções de Operação Página 266