Siemens IEEE802.11 Instruções de Operação descarregar pdf (Página 229)

Configuring with Web Based Management

5.7 "Layer 2" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

229

Description

Table 1 has the following columns:

●

Port

Shows that the settings are valid for all ports of table 2.

●

Priority / Port VID / Acceptable Frames / Ingress Filtering

In the drop-down list, select the setting for all ports. If "No Change" is selected, the entries

of the corresponding column in Table 2 remain unchanged.

●

Copy to Table

If you click the button, the setting is adopted for all ports of table 2.

Note

Table 1 is

only available if at least one VLAN is configured.

Table 2 has the following columns:

●

Port

Shows the available ports and interfaces.

●

Priority

From the drop-down list, select the priority given to untagged frames.

The CoS priority (Class of Service) used in the VLAN tag. If a frame is received without a

tag, it will be assigned this priority. This priority specifies how the frame is further

processed compared with other frames.

There are a total of eight priorities with values 0 to 7, where 7 represents the highest

priority (IEEE 802.1p Port Priority).

●

Port VID

Select the VLAN ID from the drop-down list. Only VLAN IDs defined on the "VLAN >

General" page can be selected.

If a received frame does not have a VLAN tag, it has a tag with the VLAN ID specified

here added to it and is sent according to the rules at the port.

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 291 292

Sem comentários

Siemens IEEE802.11 Instruções de Operação Página 229