Siemens IEEE802.11 Instruções de Operação descarregar pdf (Página 225)

Configuring with Web Based Management

5.7 "Layer 2" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

225

5.7

"Layer 2" menu

5.7.1

VLAN

5.7.1.1

General

VLAN configuration page

On this page, you define the VLAN and specify the use of the ports.

Note

Changing the Agent VLAN ID

If the configuration PC is connected directly to the

device via Ethernet and you change the

agent VLAN ID, the device is no longer reachable via Ethernet following the change.

Important rules for VLANs

Make sure you keep to the following rules when configuring and operating your VLANs:

Frames with the VLAN ID "0" are handled as untagged frames but retain their priority value.

As default, all ports on the device send frames without a VLAN tag to ensure that the end

node can receive these frames.

With SCALANCE W devices, the VLAN ID 1 is the default on all ports.

If an end node is connected to a port, outgoing frames should be sent without a tag (static

access port). If, however, there is a further switch at this port, the frame should have a tag

added (trunk port).

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 291 292

Sem comentários

Siemens IEEE802.11 Instruções de Operação Página 225