
6/5
Siemens IK PI · 2015
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■
Overview (continued)
Increased data rate
WLAN systems in accordance with IEEE 802.11a/b/g/h use a
single channel for sending and receiving data. This achieves a
maximum gross data rate of 54 Mbps.
Two channels are used simultaneously with the help of channel
bonding. Gross data rates of up to 450 Mbps can be achieved
in conjunction with MIMO technology in accordance with
IEEE 802.11n.
Increased data rate on IWLAN in accordance with IEEE 802.11n
with the help of channel bonding
■
Benefits
• High level of investment protection, as all products comply
with the universally recognized IEEE 802.11 standard and are
suitable for 2.4 GHz and 5 GHz
• No wear and tear – saves maintenance and repair costs for
connectors, trailing cables, sliding contacts or winding
devices
• Predictable data traffic (deterministic response) and defined
response times on the wireless link
• Wireless transmission of standard and fail-safe signals with
PROFINET and PROFIsafe
• Low-cost installation in hazardous areas of Zone 2
• End-to-end wireless network for data, voice and video
beyond corporate divisions thanks to interfacing with the
SCALANCE WLC IWLAN controller (support by
SCALANCE W78xC device types)
• Expansion of certain SCALANCE W products with additional
functions is possible using a KEY-PLUG
• KEY-PLUG/C-PLUG permits simple device replacement if an
error occurs
Communication according to IEEE 802.11n standard
Communication according to IEEE 802.11n
max. data rate: 450 Mbit/s
max. data rate: 216,7 Mbit/s
1x 40 MHz channel
2x 20 MHz channels
G_IK10_XX_30289
SCALANCE
W748-1 M12
SCALANCE
W788-1M12
SCALANCE
W748-1 M12
SCALANCE
W788-1 M12
Kap_06_IWC_en.book Seite 5 Dienstag, 7. Oktober 2014 1:47 13
© Siemens AG 2014
Comentários a estes Manuais