
6/16
Siemens IK PI · 2015
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■
Overview
• Suitable for applications where the access point is to be
mounted in the control cabinet
■
Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• 3 x R-SMA sockets for the connection of directly mountable
and remote antennas (6 x R-SMA sockets for the variants with
two wireless modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x RJ45 connector for 10/100/1 000 Mbit/s with Power-over-
Ethernet according to IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• 1 x PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Digital input for feeding in a signal from a sensor, for example,
to an SNMP-based network management system
• Digital output for converting a command received over SNMP
into a signal and switching a hardware function
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
Design and interfaces of the SCALANCE W788-2 RJ45 access points
Product versions
SCALANCE W788-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
SCALANCE W788-2 RJ45
• Two radio cards are permanently installed; functional scope
can be expanded by using a KEY-PLUG W780 iFeatures
Terminal block for
digital input/output
3x R-SMA (female) antenna connections
3x R-SMA
(female)
antenna
connections
PLUG slot
24 V DC
connection
RJ45 connection
(Gigabit)
nprXWZWY]Z
Kap_06_IWC_en.book Seite 16 Dienstag, 7. Oktober 2014 1:47 13
© Siemens AG 2014
Comentários a estes Manuais