Siemens SIMATIC FS600 Instruções de Operação descarregar pdf (Página 35)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 35/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

5 Basic Performance Data

Load memory and main memory

Total Portion of S7 standard blocks Portion of F blocks

Load Memory 93.8 Kbytes 47.7 Kbytes 46.1 Kbytes

Main Memory 76.3 Kbytes 43.9 Kbytes 32.4 Kbytes

Cycle time

Time Note

Typical total cycle time

(standard program and

safety program)

Approx.

3 ms

Measurement in the S7-CPU

("Module information CPU" / "Cycle time")

Maximum runtime safety

program

13 ms

Calculation using an Excel file available for S7

Distributed Safety Chapter

2 tells you where on the

internet you can find the table.

6 Sample Code

6.1 Download

Preliminary remark

The STEP 7 project delivered with this safety functional example contains

the hardware configuration and the sample code. The sample code is

described in the following.

The sample code is always assigned to the components used in the safety

functional example and implements the required functionality. Problems not

dealt with in this document are to be realized by the user; the sample code

may serve as a basis.

The sample code provides measures for fault detection (diagnostics). The

user has to evaluate this information and the fault must be responded to

(second shut-down method, ...).

Note

A connection between the MPI interface of your PG/PC and the MPI

interface of the CPU 315F-2DP (MPI cable) is required to download the

STEP7 project into the CPU 315F-2DP.

Password

In all cases, the password used for the safety-relevant part of the sample

code is: siemens

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 50 51

Comentários a estes Manuais

Sem comentários

Siemens SIMATIC FS600 Instruções de Operação Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Siemens SIMATIC FS600