Siemens SIMATIC FS600 Instruções de Operação descarregar pdf (Página 29)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 29/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

4.5 Important hardware component settings

The STEP 7 project delivered with this safety functional example contains

the hardware configuration and the sample code.

Below, several important settings from the hardware configuration of

STEP 7 are shown to give you an overview. It is basically possible to

change these settings (e.g. due to individual requirements), but please

consider the following note:

NOTICE

The settings shown below contribute to meeting the requirements

of category 3 / PL d / SIL 2. Changes at the settings may cause loss

of the safety function.

If you make changes to the hardware configuration of STEP 7 (e.g. add an

additional module), the sample code of the delivered STEP 7 project must

be adapted accordingly.

Overview picture

The PROFIBUS address at IM 151 HF is set using DIP switches.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Sem comentários

Siemens SIMATIC FS600 Instruções de Operação Página 29