Siemens SIMATIC FS600 Instruções de Operação descarregar pdf (Página 21)

Distributed Use of SIMATIC FS600 Laser Scanner in

Category 3 / SIL 2

Entry ID: 21330889

A&D Safety Integrated Page 21/51 AS-FE-I-010-V20-EN

21330889_as_fe_i_010_v20_en_lscanner.doc

The laser scanner SIMATIC FS600 has five male/female connectors

(X1 to X5).

Connect these male/female connectors as follows:

Male/female

connector

Function Note / Explanation

Restart

button

Connect a push button (NO) here. (This is considered in chapter 3

in the “Hardware components” table.)

The push button has two functions:

• Unlocking the internal start or restart inhibit of the laser

scanner SIMATIC FS600, if activated. This function is not

activated in the safety functional example. But a restart inhibit

is implemented in the safety program.

• Error acknowledgement, if the laser scanner SIMATIC FS600

is in failure mode.

PROFIBUS

output

If the laser scanner SIMATIC FS600 is the last device on the

PROFIBUS, a standards compliant terminating resistor must be

connected.

PROFIBUS

input

---

Power

supply

Pin 1: +24V DC

Pin 3: 0V DC

Optical PC

interface

(also

referred to

as PC

adapter)

Connected to the COM interface of the PG/PC on which the

LS4soft configuration and diagnostics software has been installed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 50 51

Sem comentários

Siemens SIMATIC FS600 Instruções de Operação Página 21