Siemens ET 757 E Series Instruções de Operação descarregar pdf (Página 79)

Commissioning (hardware)

6.2 Creating a drive configuration with STARTER

ET 200pro FC

Operating Instructions, 11/2007, A5E01100763B AA

Note

The SF LED on the S7 will not necessarily light up if an error occurs on the ET 200pro FC.

The S7 receives notification of an error only if diagnostic messages are enabled in the

converter. This is done via parameterization in HW Config. If diagnostic messages are

disabled, errors in the converter can only be read by means of the red LED on the converter.

6.2 Creating a drive configuration with STARTER

Procedure

● Connect STARTER to the to the RS232 interface of the frequency converter.

● Generate a drive configuration; in doing so, check the motor data and take into account

the power derating in relation to the ambient temperature of the frequency converter.

$

$

$

$

$

$

$

$

°C 5 °C 10 °C 15 °C 20 °C 25 °C 30 °C 35 °C 40 °C 45 °C 50 °C 55 °C 60 °C

N+]

N+]

N+]

Figure 6-2 Power derating in relation to the ambient temperature

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 189 190

Sem comentários

Siemens ET 757 E Series Instruções de Operação Página 79