Siemens ET 757 E Series Instruções de Operação descarregar pdf (Página 126)

Series commissioning and operation

8.1 Transfer of the frequency converter parameter assignment

ET 200pro FC

126 Operating Instructions, 11/2007, A5E01100763B AA

8.1.3 Parameter transfer with MMC

Upload from frequency converter to an MMC

The frequency converter features an MMC slot, into which a memory card can be inserted.

An upload of parameters from EEPROM to the MMC can only be triggered manually.

Prerequisites:

● The upload frequency converter's power supply must be connected.

● The upload frequency converter must be in the "Ready" state.

● You must have an MMC, type 6SL3254-0AM00-0AA0, at your disposal.

Procedure

Parameters Description (Parameter name and default setting (if this does not vary) in bold) Setting

Disassemble frequency converter, insert MMC into rear of frequency converter and re-

assemble frequency converter - Carry out the following steps in respect of the parameter set

that is to be uploaded:

P0010 = 30 Commissioning parameter*

0: Ready

1: Quick comm.

2: Frequency converter

30: Factory setting, parameter transfer

95: Commissioning of fail-safe functions

P0804 = … Select clone file

0: clone00.bin

…

99: clone99.bin

Remark: You can use P0804 to select the name of the clone file. In theory, up to a maximum of

100 (0 ... 99) parameter sets can be stored on one MMC.

P0802 = 2 Transfer data from EEPROM

0: Disabled

2: Start MMC transfer

If the upload was successfully completed, P0010 and P0802 are set to 0 and the "RY/RDY"

LED is lit.

An unsuccessful upload is signaled by an error message.

Download from an MMC to the frequency converter

The transfer of parameters from the MMC to the frequency converter's EEPROM can be

triggered manually or performed automatically.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 189 190

Sem comentários

Siemens ET 757 E Series Instruções de Operação Página 126