Siemens CP 1515 Instruções de Operação descarregar pdf (Página 259)

Appendix

C79000-G8976-C184-07

259

Name

Specific

Variable Description

Traps

Index

snScalanceWPowerLi

neDown

e - The power line where the

last power down occurred. 1-

M12, 2-Ethernet Power

enerated if there is a

power down on M12 or the

Ethernet power connector.

31

snScalanceWChangedPowerLin

This is g

snScalanceWPowerLi

neUp

32

snScalanceWChangedPowerLin

e - The power line where the

last power up occurred. 1-M12,

This is generated if there is a

power up on M12 or the

Ethernet power connector.

2-Ethernet Power

snScalanceWFault

rnet is off,

bit 26 = Cold/warm start,

bit 27 = C-PLUG error,

ing to

41 snScalanceWFaultValue -

Fault value:

0 = no fault,

bit 0 = power M12 is off,

bit 1 = link down,

bit 2 = internal error,

bit 23 = Link Check error,

bit 24 = IP Alive broken,

bit 25 = power ethe

This is generated if the

snScalanceWFaultValue

variable is changed.

The bit is set to "1" accord

the event that has occurred.

bit 28 = iQoS error,

bit 29 = Redundancy error"

snScalanceWIQOS

Description of the last

snScalanceWIQOS trap

51

snScalanceWIQOSValue -

snScalanceWLinkChe

ckOff

snScalanceWLinkCheckOff

Trap

a client monitored

with Link Check.

81

snScalanceWLinkCheckValue -

Description of the last

This is generated if a timeout

occurs with

snScalanceWLinkInte

grityOn

snScalanceWLinkCheckOn trap

ed with Link Check logs

on again at the AP following a

timeout.

82

snScalanceWLinkCheckValue -

Description of the last

This is generated if a client

monitor

snScalanceWClientAu

thenticated

ient

85

SnScalanceWClientsIndex - An

index of the client in the

snScalanceWClients table

This is generated when a cl

logs on at the AP.

snScalanceWClientDe

Authenticated

nt

86

SnScalanceWClientsIndex - An

index of the client in the

snScalanceWClients table

This is generated when a clie

logs off from the AP.

snScalanceWRedund

ancy

yState

- Status of redundancy

connection

e status of

connection of wireless interface

A aborts.

53

SnScalanceWRedundancyValu

e- Description of the last

redundancy trap.

SnScalanceWRedundanc

This is generated if th

the redundant connection

changes, for example when the

snScalanceWOverlap

AP

101

snScalanceWOverlapAPValue

- Description of the last

OverlapAP trap.

Is generated when an access

point is detected on the device's

own or an overlapping wireless

channel.

Operating Instructions SCALANCE W78x

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 273 274

Comentários a estes Manuais

Sem comentários