Siemens CP 1515 Instruções de Operação descarregar pdf (Página 158)

Configuration Using Web Based Management and the Command Line Interface

C79000-G8976-C184-07

158

Handling 802.11b Clients

point automatically detects whether 802.11b clients exist in the

. To avoid 802.11g packets colliding with 802.11b packets, the access

ox.

her a CTS or RTS/CTS is

802.11g Expan

r, you specify whether or not the short

slot

new

With the 802.11g Only Mode parameter, you can specify that only 802.11g clients

can log on at the access point and also that only 802.11g rates are permitted (only

in the access point mode). In this mode, only the OFDM modulation method is

used. This prevents 802.11b devices from registering. If 802.11g Only mode is

disabled, both 802.11b devices and 802.11.g devices can register with the access

point.

The access

environment

point can use the RTS/CTS method.

With the 802.11g CTS Mode list box, you specify the use of RTS/CTS (only in the

access point mode).

0 do not use RTS/CTS.

1 always use RTS/CTS with 802.11g packets.

only use RTS/CTS when there are 802.11b clients in environment.

You can set the data rate for RTS/CTS frames in the 802.11g CTS Rate list b

With the 802.11g CTS Type list box, you specify whet

sent.

sions

With the 802.11g Short Slot Time paramete

time is used. This short slot time should be supported by all

er clients.

Operating Instructions SCALANCE W78x

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 273 274

Sem comentários

Siemens CP 1515 Instruções de Operação Página 158