Siemens SLI-5310 Instruções de Operação descarregar pdf (Página 36)

36

The ECI/EQI 1300 with EnDat01 inductive

rotary encoders are mechanically compati-

ble with the ExN 1300 photoelectric encod-

ers. The taper shaft (a bottomed hollow

shaft is available as an alternative) is fas-

tened with a central screw. The stator of

the encoder is clamped by an axially tight-

ened bolt in the location hole. The scanning

gap between rotor and stator must be set

during mounting.

The ECI/EQI 1300 inductive rotary

encoders with EnDat22 are mounted as far

as possible in axial direction. The blind

hollow shaft is attached with a central

screw. The stator of the encoder is

clamped against a shoulder by three axial

screws.

Mounting the

ECI/EQI 1300 EnDat01

Mounting the

ECI/EQI 1300 EnDat22

Mounting accessories for ECI/EQI 1300

EnDat01

Adjustment aid for setting the scale-to-

reticle gap

ID 335529-xx

Mounting aid for adjusting the rotor

position to the motor emf

ID 352481-02

Accessories for ECI/EQI

For inspecting the scanning gap and

adjusting the ECI/EQI 1300

Connecting cable

For EIB 741, PWM 20

Including 3 adapter connectors, 12-pin and

3 adapter connectors, 15-pin

ID 621742-01

Adapter connectors

Three connectors for replacement

12-pin: ID 528694-01

15-pin: ID 528694-02

Connecting cable

For extending the encoder cable, complete

with D-sub connector (male) and D-sub

coupling (female), each 15-pin

ID 675582-xx

Mounting and adjusting

aid for ECI/EQI 1300

EnDat01

Mounting accessories

for ECI/EQI

Antriebsgeber_en_2013.indd 36 12.11.2013 06:54:57

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Comentários a estes Manuais

Sem comentários