Siemens Sinumerik 810T Manual do Utilizador descarregar pdf (Página 77)

EMCO WINNC SINUMERIK 810/820 T ALARMS / MESSAGES

H 1

H: Alarms and Messages

Startup Alarms

These alarms can occur only with starting WinNC or

WinCTS.

0001 Error creating the file ...

Remedy: Check whether the directories exist, which

are entered in the .INI files.

Check whether writing access is possible

to these directories.

Check whether the disk is full.

0002 Error opening the file ...

Remedy: Check whether the directories exist, which

are entered in the .INI files.

Check whether reading access is possible

to these directories (number of simulta-

neous open files).

Copy the correct file in the corresponding

directory.

0003 Error reading the file ...

see 0002.

0004 Error writing the file ...

see 0001

0005 Too less RAM ...

Remedy: Close other WINDOWS applications

Restart WINDOWS

0006 Non compatible software version ...

Remedy: Software update.

0007 Invalid licence version ...

Remedy: Contact EMCO.

0011 Serial interface ... for digitizer is already

in use

Cause: The serial interface no. ... is already

occupied by another device.

Remedy: Remove the other device and connect the

digitizer or define another serial interface

for the digitizer.

0012 Serial interface ... for control keyboard is

already in use

analogous to 0011

0013 Invalid settings for serial interface ...

Cause: The actual settings of the serial interface

are not allowed for WinNC.

Allowed settings:

Baud rate: 110, 300, 600, 1200, 2400,

4800, 9600, 19200

Number of data bits: 7 or 8

Number of stop bits: 1 or 2

Parity: none, even or odd

Remedy: Change the settings of the serial interface

in the WINDOWS system control (connec-

tions).

0014 Serial interface ... not present

Remedy: Select an existing serial interface.

0015- 0023 (various alarms)

Remedy: Restart WINDOWS. If these alarm occur

repeatedly, contact EMCO.

0024 Invalid entry for control keyboard

interface in the profile ...

Cause: The connection of the control keyboard in

the file project.ini is invalid.

Remedy: Setting with WinConfig

0025 Invalid entry for digitizer interface in the

profile ...

analogous to 0024

0026 Invalid entry for notebook option in the

profile ...

Cause: The notebook entry in the file project.ini is

invalid.

Remedy: Setting with WinConfig

0027 Error creating the start window

Remedy: Restart WINDOWS. If this alarm occurs

repeatedly, contact EMCO.

0028 Invalid entry for window representation

in the profile ...

Cause: The presentation entry in the file project.ini

is invalid.

Remedy: Setting with WinConfig

0029 Error initializing a timer

Remedy: Close all other WINDOWS applications or

restart WINDOWS.

0030 Windows 3.1 or higher required

WinNC requires WINDOWS version 3.1 or higher.

0031 - 0036 (various alarms)

see 0002

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 89 90

Comentários a estes Manuais

Sem comentários

Siemens Sinumerik 810T Manual do Utilizador Página 77

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Siemens Sinumerik 810T