Siemens CP 1515 Instruções de Operação descarregar pdf (Página 56)

Configuration Using Web Based Management and the Command Line Interface

Operating Instructions SCALANCE W 744-1PRO

56 C79000-G8976-C185-03

CLI\SYSTEM\SNMP\USER>

Command Description Comment

add <user name>

[NONE|MD5|SHA]

[authentication ID]

[Encryption ID]

Assigns an SNMPv3 user to a

group.

If authentication is necessary for the

group, the algorithm must be speci-

fied as a parameter (MD5 or SHA).

If authentication is necessary for the

group, the authentication password

must be specified

If encryption is necessary for the

group, the encryption password must

be specified as a parameter.

The authentication pass-

word and the encryption

password can be a maxi-

mum of 63 characters

long.

edit <Index>

[NONE|MD5|SHA]

[authentication ID]

[Encryption ID]

Changes the group assignment, the

authentication algorithm, and the

encryption password of the SNMPv3

user.

delete <Index>

Deletes an SNMPv3 user from the

list at the point identified by the in-

dex.

clearall

Deletes all SNMPv3 users.

CLI\SYSTEM\SNMP\TRAP>

Command Description Comment

traps [E|D]

Enables / disables SNMP traps. Traps are then enabled, if

SNMP v1, v2c is also en-

abled.

settrap <entry>

<E|D>

Specifies the IP address of the trap

recipient entry (entry between 1 and

10) and enables / disables the send-

ing of traps to this recipient.

5.2.8 SNTP Config Menu Command

Time-of-Day for Synchronization in the Network

SNTP is the acronym for Simple Network Time Protocol. An SNTP server uses this

protocol to provide a uniform time throughout the entire network. Clients can syn-

chronize themselves with this time.

If you enter the IP address of an SNTP server here and select the time zone of the

SCALANCE W744, the SCALANCE W744 uses the time information from the

server. The SCALANCE W744 adopts this time information without any further

conversion regarding daylight-saving or standard time.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Comentários a estes Manuais

Sem comentários

Siemens CP 1515 Instruções de Operação Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Siemens CP 1515