Siemens EK 726 Series Manual de Serviço descarregar pdf (Página 9)

INTRODUCTION

MICROMASTER

MICROMASTER Vector

MIDIMASTER Vector

SIEMENS DA 64 – 2002/2003

1/3 Version D

1.2 Technical data

Drive inverter MICROMASTER MICROMASTER

Vector

MIDIMASTER Vector

Line supply voltage

1-ph. 208 V – 240 V AC ±10%

3-ph. 208 V – 240 V AC ±10%

3-ph. 380 V - 500 V AC ±10%

3-ph. 208 V - 240 V AC ±10%

3-ph. 380 V - 500 V AC ±10%

3-ph. 525 V - 575 V AC ±15%

1-ph. 230 V AC

3-ph. 230 V AC

3-ph. 400 V AC

3-ph. 575 V AC

120 W – 3.0 kW

120 W – 4.0 kW

370 W – 7.5 kW

5.5 (VT 7,5) kW - 45 (VT 45) kW

11 (VT 15) kW - 75 (VT 90) kW

2.2 (VT 4) kW - 37 (VT 45) kW

Degree of protection IP20/NEMA1 IP21/NEMA1 or IP56

In conformance with EN 55011,

Class A for

1-ph. 230 V AC

3-ph. 230 V AC

3-ph. 400 V AC

3-ph. 575 V AC

Integrated filter

External filter

Integrated / external filter

xxx

Internal / external filter

xxx

In conformance with EN 55011,

Class B for

1-ph. 230 V AC

3-ph. 230 V AC

3-ph. 400 V AC

3-ph. 575 V AC

External filter

xxx

External filter

xxx

Temperature range 0 – 50°C 0 – 40°C

Control technique V/Hz Sensorless vector control, FCC, V/Hz

Overload capability

) 150% rated output

current

for 60 s

150% rated output current for 60 s

200% rated output current for 3 s

Protective functions

Undervoltage, overvoltage, overload, short-circuit, ground fault, motor failure, motor overtemperature, drive

inverter overtemperature

Max. motor cable length Refer to Section 3 Refer to Section 3

Frequency range 0 - 400 Hz 0 - 650 Hz 0 - 650 Hz

Setpoint resolution 0.05 Hz

Digital inputs

3, parameterizable

(19 functions)

6, parameterizable (24 functions)

Fixed frequencies 7 8

Ramp-up/ramp-down times 2

Relay outputs

1, parameterizable

110 V AC / 0.3 A

30 V DC / 1.0 A

2, parameterizable

240 V AC / 0.8 A

30 V DC / 2 A

Analog inputs 1 2

Analog outputs - 1, parameterizable 2, parameterizable

Serial interfaces RS485

Dynamic braking Compound braking Braking chopper External braking module

Internal technology controller PI PID

) The overload capability refers to the rated output currents of the MICROMASTER and MICROMASTER Vector drives as well as

the rated output currents for constant torque operation (CT) of the MIDIMASTER Vector. It is valid for a 5 minute load duty cycle.

This means that the drive units can have an overload condition of 50% for a total of 1 minute within a 5 minute period.

Table 1: Technical data

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 119 120

Comentários a estes Manuais

Sem comentários

Siemens EK 726 Series Manual de Serviço Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens EK 726 Series