Siemens TL.. Manual de Instruções descarregar pdf (Página 24)

Operating Instructions

Manipulating the Moveable Drawout Element

CAUTION

Unlocked Position to Test Position

Racking the moveable drawout element from the Unlocked

position to the Test position engages the moveable drawout

element with the stationary drawout element. The physical

position of the moveable drawout element will be unchanged.

Complete the steps that follow to rack the moveable drawout

element from the Unlocked position to the Test position.

NOTE: If extension rails are pulled out, push them in until

they hit a solid stop.

1. Push in the directional shift lever. This is the racking-in position.

2. Pull the release lever down to the release-disengaged position.

(Illustrated beneath padlock device.) If the breaker contacts are

closed, pulling the release lever down will trip the breaker.

3. Pump the racking pump handle until the moveable drawout element

has reached the Test position.

4. When the moveable drawout element reaches the Test position, the

release lever will automatically return to the release-engaged (up)

position, the racking pump cannot be pumped, and the position

indicator will display that the moveable drawout element is in the

Test position.

To avoid damaging the racking mecha-

nism, always pull the release lever

before racking the moveable drawout

element.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 65 66

Sem comentários

Siemens TL.. Manual de Instruções Página 24