Siemens TL.. Manual de Instruções descarregar pdf (Página 21)

Operating Instructions

Manipulating the Moveable Drawout Element

Racking Controls

A built-in, low-force pump handle and two control levers are

used to rack the moveable drawout element between the

Connected, Test, and Unlocked positions.

Racking Controls Locations

Directional Shift Lever

The directional shift lever determines the direction the movable

drawout element will move when it is racked. The lever has three

positions: racking-out, neutral, and racking-in. When the lever is in

the racking-out position (pulled all the way out), the moveable

drawout element may be racked from the Connected position to

the Test position, and from the Test position to the Unlocked posi-

tion. When the lever is set in the neutral position (located mid-

way between the racking-in and racking-out positions), the

racking pump handle is disengaged from the racking mechanism.

In the racking-in position (pushed all the way forward), the

moveable drawout element may be racked from the Unlocked

position to the Test position, and from the Test position to the

Connected position.

1. Racking-out Position

2. Neutral Position

3. Racking-in Position

E. Racking

Pump

Handle

C. Position

Indicator

A. Moveable

Drawout

Element

F. Directional

Shift Lever

D. Stationary

Element

B. Release

Lever

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

Sem comentários

Siemens TL.. Manual de Instruções Página 21