Siemens ET 790 Series Informações Técnicas descarregar pdf (Página 84)

Combination Devices

Input/output devices

4/4

Siemens ET G1 · 10/2008

Type Description

N 502 N 502 combination switch actuators

• Outputs identical or can be individually configured

• Operating mode can be adjusted for each output

(normal mode, timer mode)

• Switching behavior can be adjusted for each output

(NO contact/NC contact)

• Adjustable ON/OFF delay

• Selectable logic operation (AND/OR) of two communication

objects and adjustable start value of operation in the event of

bus power recovery

• Object can be added per output, night mode for limited ON

switching of lighting during the night

• Adjustable ON period during night or timer mode

• Selectable warning of impending OFF by turning the device

briefly on and off three times (flashing) during night or timer

mode

• Object for status indication can be added for each output

• Transmission of status objects on demand and/or automatically

after modification

• Integrated 8-bit scene control and integration of each channel

in up to 8 scenes

• Unchanged switching state of all outputs during power failure

• Switching state can be adjusted for each output after system

recovery

N 670 Universal N 670 I/O modules

2 x universal I/O, 2 inputs for Pt1000, 2 outputs 230 V AC, 10 A

• 2 universal inputs/outputs, each adjustable as

- Analog input 0 V ... 10 V DC

- Analog output 0 V ... 10 V DC

- Binary input for 10 V DC

- Binary output for 10 V DC

• Analog output with adjustable lower and upper limit of the

output voltage with adjustable voltage value in the event of bus

voltage failure and recovery

• Binary input with pulse edge evaluation

• Configurable actuated position (NO contact/NC contact)

• Positively driven operation

• Configurable behavior in the event of a bus power failure/recovery

• Analog input and PT1000 input with

• Limit value monitoring

• Limit value signal

• Adjustable limit values

• Adjustable hysteresis

N 605 N 605 thermal drive actuators

With 6 inputs and outputs each

• For control of electrothermal actuators for small valves for

heaters and cooling ceilings

• Configurable contact type (NO contact/NC contact)

• Configurable transmission of the input status objects by

request, in case of change, cyclically and/or in case of bus or

system voltage recovery

• Signaling of a short-circuited or overloaded output and

de-energizing of this output

• Configurable valve open and close time

• Configurable valve state (open or closed) in case of

de-energized output

• Adjustment to a non-linear valve characteristic curve

• With configurable control per output either by positioning

commands in percentage or by ON/OFF switch commands

• Conversion of percentage positioning commands into pulse

width modulated switch commands

• With per output configurable position in case of an open

window

• With transmission of an output status object on request or if the

switching state change

• Configurable behavior in the event of a bus power failure

• With optional calcification protection

• Configurable transmission

N 605/11 N 605/11 thermal drive actuators

6 inputs, 2 x 3 outputs for control of 2 heating/cooling mats

• For control of electrothermal actuators for small valves for

heaters and cooling ceilings

• Configurable contact type (NO contact/NC contact)

• 6 outputs, each with one silent semiconductor switch, divided

into 2 groups, each with 3 outputs and fixed assignment of

outputs to the forward flow and return valves

• Configurable valve open and close time

• Signaling of a short-circuited or overloaded output and

de-energizing of all outputs of the respective group

• Control of all outputs over ON/OFF switch command

• Transmission of the output status object on request or if the

switching state changes, optionally with automatic switchover

of the return valve between heating and cooling mode or with

switchover of the return valve over an object

• De-energizing of return valve output if the forward flow valves

are closed

• Configurable behavior in the event of a bus power failure

• Configurable transmission

N 526/02 N 526/02 switch/dimming actuators

triple, 230 V AC, 6 A, with constant light level control

• Integrated constant light level control per output (outputs are

master/slave-capable)

• Configurable starting value

• Adjustable dimming time

• Switching ON/OFF

• BRIGHTER/DARKER dimming

• Switching ON/OFF possible over BRIGHTER/DARKER dimming

• Set 8-bit value

• Night mode (lighting for cleaning)

• Send switching and dimming status

• Configurable behavior in the event of a bus power

failure/recovery

Accessories

AP 255

UP 255

AP 255, UP 255 indoor brightness sensors,

For N 526/02 switch/dimming actuators

• For direct connection to N 526/02 switch/dimming

actuators over a 3-wired cable of up to 100 m in length, which

also serves to power the sensor electronics

• Plug-in low-voltage terminal for connection of the cable to

N526/02

• Including two rigid optical fiber rods:

- Parallel light-sensitive surface for mounting surface

- Inclined (45°) light-sensitive surface for mounting surface

UP 255 indoor brightness sensors

• For mounting in a hollow-wall or flush-mounting box with

∅

58 mm and min. 40 mm mounting depth

• Cover made of white plastic (polystyrene)

• Dimensions (H x W x D): 30 x 52 x 33 mm

AP 255 indoor brightness sensors

• For ceiling or wall mounting

• Includes surface-mounting enclosure made of white plastic

(polypropylene) with

∅

70 mm and 24 mm in height

• Dimensions (H x W x D): 30 x 72 x 33 mm

ET_G1_2009_en.book Seite 4 Freitag, 28. November 2008 9:50 09

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 291 292

Comentários a estes Manuais

Sem comentários

Siemens ET 790 Series Informações Técnicas Página 84

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens ET 790 Series