Siemens EF 711 Series Guia do Utilizador descarregar pdf (Página 77)

100

101

Configuring the SCALANCE IWLAN Controller

Configuring the SCALANCE IWLAN Controller for the First Time

SCALANCE WLC711

User Guide, V8.11, 07/2012, C79000-G8976-C260-03 2-47

2. In the left pane, click SNMP. The SNMP screen is displayed.

3. In the SNMP Common Settings section, configure the following:

– Mode — Select SNMPv1/v2c or SNMPv3 to enable SNMP.

– Contact Name — The name of the SNMP administrator.

– Location — The physical location of the SCALANCE IWLAN Controller running the

SNMP agent.

– SNMP Port — The destination port for the SNMP traps. Possible ports are

0–65555.

– Forward Traps — The lowest severity level of SNMP trap that you want to forward.

– Publish AP as interface of controller — Enable or disable SNMP publishing of the access

point as an interface to the SCALANCE IWLAN Controller.

4. Continue with the appropriate procedure for configuring SNMPv1/v2c-specific or SNMPv3-

specific parameters.

– Configuring SNMPv1/v2c-specific Parameters

– Configuring SNMPv3-specific Parameters

Configuring SNMPv1/v2c-specific Parameters

1. Configure the following parameters on the SNMPv1/v2c tab:

– Read Community Name — The password that is used for read-only SNMP

communication.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 491 492

Comentários a estes Manuais

Sem comentários

Siemens EF 711 Series Guia do Utilizador Página 77

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens EF 711 Series