Siemens EF 711 Series Guia do Utilizador descarregar pdf (Página 362)

Working with a Wireless Distribution System

Deploying the WDS System

SCALANCE WLC711

11-18 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

3. In the Wireless APs list, select the radios of the Satellite APs — Osborn, Oscar, Orson and

Oswald.

Note:

If you want the Root Wireless AP and the Repeater Wireless APs to service the client devices, you must

select their radios in addition to the radios of the Satellite Wireless APs.

4. To save your changes, click Save.

5. Log out from the SCALANCE IWLAN Controller.

Connecting the WDS Wireless APs to the Enterprise Network for

Provisioning

You must connect the WDS Wireless APs to the enterprise network once more to enable them to

obtain their configuration from the SCALANCE IWLAN Controller. The configuration includes

the pre-shared key, preferred parent and backup parent. For more information, see Provisioning

the WDS Wireless APs on 11-11.

Moving the WDS Wireless APs to the Target Location

1. Disconnect the WDS Wireless APs from the enterprise network, and move them to the target

location.

2. Install the WDS Wireless APs at the target location.

3. Connect the Wireless APs to a power source. The discovery and registration processes are

initiated.

Note:

If you change any of the following configuration parameters of a WDS Wireless AP, the WDS Wireless AP will

reject the change:

• Reassigning the WDS Wireless AP’s role from Child to None

• Reassigning the WDS Wireless AP’s role from Both to Parent

• Changing the Preferred Parent of the WDS Wireless AP

However, the SCALANCE IWLAN Controller will display your changes, as these changes will be saved in the

database. To enable the WDS Wireless AP to obtain your changes, you must remove it from the WDS

location and then connect it to the SCALANCE IWLAN Controller via the wired network.

Note:

If you change any of the following radio properties of a WDS Wireless AP, the WDS Wireless AP will reject

the change:

• Disabling the radio on which the WDS link is established

• Changing the radio’s Tx Power of a radio on which the WDS link is established

• Changing the country

NOTICE

Warning: If you skip this step, the WDS WWireless APs will not work at their target location.

1 2 ... 357 358 359 360 361 362 363 364 365 366 367 ... 491 492

Sem comentários

Siemens EF 711 Series Guia do Utilizador Página 362