Siemens EF 711 Series Guia do Utilizador descarregar pdf (Página 111)

Configuring the Wireless AP

Configuring Wireless AP Settings

SCALANCE WLC711

User Guide, V8.11, 07/2012, C79000-G8976-C260-03 3-23

Right Antenna Type Click to select No Antenna or choose an antenna type from the

drop-down list.

Advanced Dialog

Poll Timeout Type the timeout value, in seconds, for the Wireless AP to re-

establish the link with the SCALANCE IWLAN Controller if it

(Wireless AP) does not get an answer to its polling. The default

value is 10 seconds.

Note: If you are configuring session availability, the Poll Timeout

value should be 1.5 to 2 times the Detect link failure value on the

AP Properties screen. For more information, see “Session

Availability” on page 12-9.

Enable SSH Access Click to enable or disable SSH for access to the Wireless AP

Note: The name of this field depends on type of Wireless AP that

you have selected.

Enable Telnet Access Click to enable or disable Telnet for access to the Wireless AP

Note: The name of this field depends on the type of Wireless AP

that you have selected.

Enable Secure Tunnel Click to Enable or Disable secure tunnel. This feature, when

enabled, provides encryption, authentication, and key

management for data traffic between the AP and/or controllers.

Note: Secure tunnel can only be enabled when a V8.11

compatible AP is added to the network. Secure tunnel must be

disabled for APs running previous versions.

Enable location-based-service Enable or disable the AeroScout or Ekahau location-based

service for the Wireless AP.

Maintain client session in event of poll

failure

Select this option (if using a bridged at AP VNS) if the Wireless AP

should remain active if a link loss with the controller occurs.This

option is enabled by default.

Restart service in the absence of

controller

Select this option (if using a bridged at AP VNS) to ensure the

Wireless AP’s radios continue providing service if the Wireless

AP’s connection to the SCALANCE IWLAN Controller is lost. If

this option is enabled, it allows the Wireless AP to start a bridged

at AP VNS even in the absence of a SCALANCE IWLAN

Controller.

Use broadcast for disassociation Select this option if you want the Wireless AP to use broadcast

disassociation when disconnecting all clients, instead of

disassociating each client one by one. This will affect the behavior

of the Wireless AP under the following conditions:

• If the Wireless AP is preparing to reboot or to enter one of the

special modes (DRM initial channel selection).

• If a BSSID is deactivated or removed on the Wireless AP.

This option is disabled by default.

Table 3-8 AP Properties (continued)

Field Description

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 491 492

Comentários a estes Manuais

Sem comentários

Siemens EF 711 Series Guia do Utilizador Página 111

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens EF 711 Series