Siemens GS..D.. Manual do Utilizador descarregar pdf (Página 10)

How to configure an Anybus PROFIBUS Slave module with a Siemens Step7 PLC

SCM-7032-026

Rev 2.1

5 PROFIBUS configuration

1.3. Importing the GSD file

It is necessary to import the Anybus GSD-file to the configuration tool in order to include the Anybus

Module. In this case an Anybus Slave module is added as a slave in the network. The GSD-files can be

downloaded at HMS

webpage.

Note: After downloading the GSD-file has to be renamed. The SIMATIC software does not accept file

names longer then 12 characters.

Figure 9 Install a new GSD file in "HW Config".

1.4. Configuring the Anybus module

The Anybus module can be found in the hardware catalogue after the GSD file has been imported.

Figure 10 The Anybus module in the Hardware Catalogue.

It is now possible to include the Anybus slave in the network.

www.Anybus.com

www.anybus.com HMS Industrial Networks AB

Page 10 (30)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sem comentários

Siemens GS..D.. Manual do Utilizador Página 10