Manual machining
5.2 Display and operator control optios in the main screen for "Manual Machine Plus"
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
41
5.2.6 Tool change
Functionality
A basic differentiation must be made between a manual and an automatic tool-changer
system.
For an automatic system, the tool change is controlled by the PLC user program. The
currently loaded tool is displayed in the "Manual Machine Plus" main screen.
For a manual system, the required tool number is manually entered from an input screen
form.
Figure 5-5 Extract from main screen "Manual Machine Plus", entry of tool number
Operating sequences
Follow the sequence of operations below to enter the required tool number:
1. Move the cursor onto the input field for the T value.
2. Enter the tool number using the numeric keys
(the tool you wish to select must be set up in the tool list!).
3. Accept the tool number by pressing the <INPUT> key.
The following information text with the corresponding tool number is displayed:
Figure 5-6 Tool change with NC Start
Acknowledge this information text using the "Cancel" softkey.
$ERUW
Comentários a estes Manuais