Siemens Sinumerik 810T Manual de Instruções descarregar pdf (Página 36)

11 Alarms 01.93

11.9 General RESET alarms

Cause:

Abhilfe:

This occurs only at NC Start after block search in the target block

when the MD ”Add axis after block search” have been set:

• axes are to be added in G36 blocks

• axes are to be added in G98 blocks without axis traverse motion.

Do not perform block search on this block.

2193

No additional axes possible

Cause:

Remedy:

Occurs only if a G68 is to be generated for the rotary axis in a G36

block when MD 572* bit 2=1.

• Program the rotary axis first of all with G0 or G01

(e.g. G0 91 C=0).

• Select target block in such a way that no G36 is active in the target

block and that the rotary axis is already programmed before the

G36 block.

2194

G36 position rotary axis missing

SINUMERIK 810 GA3/820 GA3 (IA)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 61 62

Sem comentários

Siemens Sinumerik 810T Manual de Instruções Página 36