Siemens CP 243-2 Instruções de Operação descarregar pdf (Página 20)

When are the modules mounted?

Only when points 4 and 5 have been dealt with. Cables can be routed in any

way.

How is testing done?

Input/output tests are performed by the familiar PLC method, i.e. the

sensors are activated locally and then checked in the PLC.

How is it all configured?

The configuration is simply read in by entering the AS-Interface profile for

each slave in the master. This usually happens automatically but can be

done manually in the controller software.

Are the slaves detected?

First you must check whether the master has recognised all its slaves. Only

then can you switch to protected operation and switch the controller to

RUN.

10.

How do you get the whole thing up and running?

You can either create your own controller software in the usual way or use

existing software. In the latter case, you might have to adapt the symbolic

assignment of addresses.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Sem comentários

Siemens CP 243-2 Instruções de Operação Página 20