Siemens TL.. Instruções de Operação descarregar pdf (Página 39)

Application

3.15 Moving the cabinets

3.15.4 Lifting the cabinet off the transport pallet

The cabinets are attached to the pallet by means of transport locks (upward-facing screws). To lift the

cabinets off the pallet, you first need to undo the screw nuts.

To slide the cabinets off the pallet, you need to push the screws out downwards far enough (e.g. using a

hammer and a thick nail), so that the surface of the pallet becomes smooth.

Figure 3-25 Location of screws on the DC and drive cabinet Figure 3-26 Location of screws on the AC cabinet

All cabinets can be moved on rollers placed under the cabinet frame. As rollers, you should use solid

metal rods with a length of 20 cm and a diameter of 2 cm.

The cabinet can be slid off the pallet onto rollers.

Figure 3-27 Moving the cabinet off the standard pallet

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 60 61

Sem comentários

Siemens TL.. Instruções de Operação Página 39