Siemens E12 Manual do Utilizador Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 47
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 25
Industry Automation and Drive Technologies - SCE
TIA Training Document
Page 26 of 47 Module
E12
Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120
FB1 Input Parameters
Notes
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Description
Data Type
Declaration
Address of the control byte in the SIMATIC VS120
interface that is entered under the Connection
Control.
This parameter has to be wired.
Address of the status byte of the SIMATIC VS120
interface that is entered under Connection Control
Start address of the user data interface "Send“ of the
SIMATIC VS120/"Receive“ of the PLC
Start address of the user data interface "Receive“ of
the SIMATIC VS120/ "Send“ of the PLC
Model number 1 to 15.
Note: For model changes, the DISA bit has to be set
Disable: disables manual key operation
Reset: Reset error evaluation device or FB error.
Note: Works also without setting the DISA bit
Trigger: Image pickup and starting the evaluation
Delay time: transfer of the trigger delay time to the
SIMATIC VS120 in us
(value range: 0 to 9.999.999us)
Note
NoteNote
Note: The delay value is a multiple of 50us with
rounding off limits of 0 or 50us. For example, 49us
become 0us. 65us become 50us.
Receive: Receive area for the result values
Permissible are only data block areas and the data
type BYTE. This parameter has to be wired and the
data block has to be at least as large as the maximum
result to be expected.
Delay time: transfer of the trigger delay time to the
SIMATIC VS120 in us (value range: 0 to 9.999.999us).
Note:
The delay value is a multiple of 50us with rounding off
limits of 0us or 50us. For example, 49us becomes
0us, 65us becomes 50us..
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

Comentários a estes Manuais

Sem comentários