Siemens ITC Instruções de Operação Página 25
- Página / 132
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Installing and connecting the device
3.3 Mounting the device
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
25
Procedure
Note
Risk of guaranteed degree of protection not being met
If the mounting seal is damaged or protrudes beyond the device, the degree of protection is
not ensured.
Checking the placement of the mounting seal
To avoid leakage around the mounting cutout, do not install the mounting seal turned inside
out. If the mounting seal is damaged, order a replacement seal.
Note
Installing the device
Always mount the device according to the instructions in this manual.
Mounting clamps for ITC1200:
Mounting clamps for ITC1500, ITC1900, and
ITC2200:
Proceed as follows:
1. Working from the front, insert the device into the mounting cut-out.
2. Insert the mounting clamp into the cutout provided on the device.
3. Secure the mounting clamp by tightening the threaded pin.
Note
Observe a torque of 0.5 Nm when tightening the threaded pins of the mounting clamps:
4. Repeat steps 2 and 3 for all mounting clamps.
5. Check the fit of the mounting seal.
Result
The device is mounted and the degree of protection is ensured at the front.
- A5E03474888-02 1
- Preface 3
- Registered trademarks 4
- Conventions 4
- Illustrations in this manual 4
- Recycling and disposal 4
- Table of contents 5
- Table of contents 7
- Overview 9
- 1.2 Product package 10
- 1.3 Layout of the devices 11
- Rear view 12
- 352),1(7(WKHUQHW 13
- $XWRPDWLRQV\VWHP 13
- Access to SINUMERIK 14
- Overview 15
- 1.5 Typical applications 15
- 1.6 Requirements 16
- Safety instructions 17
- 2.2 Security information 18
- Procedure 19
- ① Inclined ≤ 35° 21
- ② Vertical 0° 21
- 3.2.4 Checking clearances 22
- Degrees of protection 23
- ,7& 24
- ,7& 24
- ,7& 24
- ,7& 24
- 3.4 Connecting the device 26
- 3.4 Connecting the device 27
- Wiring diagram 28
- *1' 29
- '&9 29
- ① to a server 30
- ① and ② 31
- 3.5 Installing strain relief 32
- Commissioning the device 33
- Special features 34
- Assigning device parameters 35
- Procedure on the device 36
- SSH configuration service 37
- Access without logon 37
- See also 37
- 5.3.1 Access and structure 38
- ④ Open "Help" 39
- 5.3.2 Device data 40
- 5.3.3 System settings 41
- Specifying device name 42
- Setting up screen 42
- Update firmware 43
- Restore to factory settings 44
- 5.3.4 Network settings 46
- Specify network parameters 47
- Use DNS server 48
- Check valid settings 48
- 5.3.5 Connections 50
- Factory default settings 52
- Structure of the tab 53
- Buttons 53
- 5.3.5.3 Connection settings 54
- Functions 57
- 5.3.6 Password settings 58
- 5.3.7 Desktop settings 61
- 5.3.8 Application settings 64
- Proxy bypass 65
- 5.4.1 Introduction 66
- 5.4.2 Installation 67
- 5.4.3 Start 68
- User interface 69
- Copy button 72
- 5.4.4.2 Perform action 74
- 5.4.4.3 Status 75
- Resetting the key 77
- 5.4.6 Assigning a key 78
- 5.4.7 Basic settings 79
- Configuring the server 81
- 6.2 VNC 83
- 6.3 Sm@rtServer 84
- 6.4 SINUMERIK 85
- 6.4 SINUMERIK 86
- Operating the device 87
- 7.2 Front operator controls 88
- 7.3 Operating the taskbar 89
- Taskbar is minimized 90
- Taskbar is hidden 90
- 7.3.2 Starting a connection 91
- ① or bottom 94
- ④ edge of the screen 94
- ② and ③ on the right change: 94
- Operating the device 95
- Removing a USB memory device 96
- Requirement 97
- Cleaning 98
- 8.4 Spare parts and repairs 99
- 8.4 Spare parts and repairs 100
- Technical specifications 101
- FM Approval 102
- Ex approval 102
- Marking for Australia 102
- IEC 61131 102
- Use in industry 103
- Introduction 103
- 9.2.2 ESD guideline 104
- ① Synthetic materials 105
- ② Wool 105
- 9.3 Dimensional drawings 106
- Technical specifications 107
- 9.3 Dimensional drawings 107
- 9.3 Dimensional drawings 108
- Weight 110
- Display 110
- Input device 110
- Memory 111
- Interfaces 111
- Power supply 111
- Miscellaneous 111
- 9.4.2 Performance data 112
- 9.4.3 Ambient conditions 112
- Reducing vibrations 113
- Climatic ambient conditions 114
- Pulse-shaped interference 115
- Sinusoidal interference 115
- Test voltages 116
- Protection class 116
- 9.5.1 Power supply 117
- 9.5.2 USB 117
- 9.5 Description of the ports 118
- Technical Support 119
- A.1 Service and support 120
- Abbreviations 121
- Glossary 123
- Sm@rtAccess/Sm@rtServer 125
- Index 129
Manuais e produtos relacionados com Servidores Siemens ITC
Servidores Siemens BS2000/OSD Manual do Utilizador
(11 páginas)
(11 páginas)
Servidores Siemens BS2000/OSD Informações Técnicas
(47 páginas)
(47 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais