Siemens OSM Manual do Utilizador Página 56

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 55
Command Interpreter (CLI)
3-13
Industrial Ethernet OSM/ESM Network Management
C79000-G8976-C137-08
Table 3-5 Settings in the Agent Menu
Command CommentDescription
snmp <E | D> Enable | Disable SNMP. Administrator only
SNMP must be enabled if you want to
access the OSM/ESM with the Internet
browser or using SNMP.
traps <E | D> Enable | Disable traps, see Section
2.8.
Administrator only
showtrap Shows the current trap configuration.
settrap
<entry> <IP> <E| D>
Sets a trap recipient as an entry in the
trap configuration.
entry: Trap entry 1 - 10
IP: IP address of the trap recipient
Enable | Disable this trap recipient.
Administrator only
setrmon This command is only used internally
to store and load the configuration.
Administrator only
Not for OSM TP22 and ESM TP40
getcomm <string> Sets a read-only community string (up
to 32 characters). The default is
public.
Administrator only
setcomm <string> Sets a read-write community string (up
to 32 characters). The default is
private.
Administrator only
ping [count] [size] <IP> Sends a ping to the specified IP
address.
Example:
ping -c 10 -s 128 192.168.1.1
Ten (count) pings with a frame length
(size) of 128 bytes are sent to IP
address 192.168.1.1.
showec Shows the current event configuration.
setec <event> <E |
D><E | D><E | D>
Sets an entry in the event
configuration. Enable | Disable this
entry.
Administrator only
showdis Shows the state of the digital inputs of
the device.
Only OSM/ESM with digital inputs
showdic Shows the configuration of the digital
inputs of the device.
Only OSM/ESM with digital inputs
setdname <input>
<name>
With this function, you can assign a
symbolic name (string) with a length of
up to 64 characters to each digital
input. (To insert a blank in a string, use
the tilde (~) instead of a blank.)
Example: setdname 5 doorcontact
Assigns the symbolic name
doorcontact to digital input 5 of the
OSM BC08.
Administrator only
Only OSM/ESM with digital inputs
Vista de página 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 157 158

Comentários a estes Manuais

Sem comentários