Siemens ESM Instruções de Operação descarregar pdf (Página 24)

Building Technologies

Page 24 of 50 Last Revised: 4/11/2011

Motor speed

Sets the value of the motor speed in RPM taken from the motor

rating plate.

1. Press

to modify the parameter value.

2. Using the

and keys (or digit-by-digit method) increase or

decrease the displayed value.

3. Press

to confirm the selected value. The display will

automatically display the next parameter in the commissioning

sequence.

Motor identification

Sets the motor data identification and speed controller optimization.

1. Press

to modify the parameter value.

2. Using the and keys to scroll through the various options

until the required setting is visible.

3. Press

to confirm the selected value. The display will

automatically display the next parameter in the commissioning

sequence.

Motor identification will not start until the basic commissioning

sequence has been completed.

Macro Parameter

Skip over the MAc PAr option. This is a Macro parameter for

automatically setting the basic interface I/O, and normally

would not need to be changed, so leave P15 = 12.

Minimum RPM

Sets the lowest speed to which the motor operates independently of

the frequency setpoint.

1. Press

to modify the parameter value.

2. Using the and keys (or digit-by-digit method) increase or

decrease the displayed value.

3. Press

to confirm the selected value. The display will

automatically display the next parameter in the commissioning

sequence.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Sem comentários

Siemens ESM Instruções de Operação Página 24