Siemens ET8 Series Instruções de Operação descarregar pdf (Página 36)

Additional Information CLV61x Dual Port (PROFINET IO)

PROFINET name allocation:

The PN name allocation ("baptism") can be carried out very simply following prior checking of the

PN name by allotting the PN name from the S7 HW Config.

• First mark the Ethernet cable ( Cable is continuously identified)

• Next, select the PN name test: "PLC / Ethernet / Verify Device Name".

• It will now be verified whether the desired PN name is available in the network.

Then click "Assign Name".

• In the following dialog box, the PN name to be allocated can be selected at the top, and at the

bottom the PN devices present in the network are represented.

Now the desired device can be selected and using "Assign name", the PN name is transferred to

this device.

If there is any uncertainty as to the location of each device, flashing can be activated for a PN

device beforehand. The CLV61x Dual Port signals flashing at the "SF" LED.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Sem comentários

Siemens ET8 Series Instruções de Operação Página 36