Siemens EF 83H Series Manual do Utilizador descarregar pdf (Página 79)

Using the COM5434 Configurator

5-15

SIMATIC 505 PROFIBUS-FMS CP User Manual

NOTE:

If you customize the Bus Parameter Profile by selecting Custom in

the Bus Parameter Profile field and changing values in any of the fields

below

, every device on your network must have the same or a compatible

profile. Otherwise, your system cannot function properly

If you selected Custom in the Bus Parameter Profile field, you can change

the following parameters for your module local configuration:

Slot Time (Tslot) Enter

the maximum time, in bit times, that a master

station on your network waits for a response after sending a message.

Max. Sta. Delay (Max_Tsdr) Enter

the maximum time, in bit times, that

a responder delays before beginning a response.

Min. Sta. Delay (Min_Tsdr) Enter

the minimum time, in bit times, that a

responder delays before beginning a response.

Setup Time (Tset) Enter

the time, in bit times, between events and the

necessary reaction.

Quiet Time (Tqui) Enter

the minimum time, in bit times, that a

transmitting station must wait between sending a message and

enabling its receiver

Gap Factor Enter

a number that indicates when the master must

perform a gap update. For example, if you choose a gap factor of 10, the

master can hold the token for 9 turns without performing a gap update;

on the 10th turn, the master must begin to poll the gap, checking one

station each time it receives the token.

Retry Limit Enter

the number of times a master may retry a

transmission.

Token Rotation (Ttr) Enter

the anticipated time, in bit times, for one

token round on your network, including allowances for high and low

priority transactions, errors, and polling the gap.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 186 187

Sem comentários

Siemens EF 83H Series Manual do Utilizador Página 79