Siemens XPS15F Manual de Instruções descarregar pdf (Página 4)

XPS D Series - Certificate SIRA 01ATEX5262X

This equipment may be used in all hazardous dust zones with all conductive and

non-conductive dusts. The Type XPS-10D, XPS-15D, XPS-30D and XPS-40D Series

transducers have a maximum surface temperature of 135°C (275°F) (Temperature Class T4).

These units are certified for use in ambient range of -40 to 95°C (-40 to 203°F). The

transducers should not be used outside this temperature range. The XPS-10D, XPS-15D,

XPS-30D and XPS-40D Ultrasonic Transducers must be installed so the face of the

transducer is not substantially subjected to light.

Installation shall be carried out in accordance with the applicable code of practice, and by

suitably trained personnel.

These devices should only be supplied from a circuit containing a suitably rated fuse that has

a breaking capacity of 4000A. This fuse is included in Siemens Milltronics transceivers.

Repair of the equipment shall be carried out in accordance with the applicable code of practice

and Installation Instructions.

The certification of this equipment relies on the following materials used in their construction:

Enclosure Kynar complete with carbon nanotube (Polyvinylidene Flouride (PVDF) with carbon

nanotube [RTP Part No. 3399 X 93208 E]).

Encapsulant Stycast LA-9823-76 or Durapot 864 (as appropriate)

Manual override can be accomplished by using the disconnect switch provided in the building

installation of the associated controller.

XPS D Series Product Marking

SERIAL No.:

V 1.77 V r.m.s.; 250 V

I 44.2 mA r.m.s.

AMBIENTTEMP.: –40 C TO 95 C

XPS-xxD

ULTRASONIC TRANSDUCER

EExmIIT4

0518

SIEMENS MILLTRONICS PROCESS INSTRUMENTS INC. PETERBOROUGH

SEE INSTRUCTION MANUAL FOR OPERATION.

PETERBOROUGH, CANADA

II 2G 1D T4

II 2GD T4

SIRA 01ATEX5262X

4 XPS/XCT Transducers 7ML19981AK01.2

1 2 3 4 5 6 7 8 9 ... 23 24

Sem comentários

Siemens XPS15F Manual de Instruções Página 4