Siemens S7 Manual do Utilizador descarregar pdf (Página 61)

Installing and Starting the Ethernet CP with STEP 7

SIMATIC NET NCM S7 for Industrial Ethernet

C79000-G8976-C129–06

Procedure

To enter a substitute object in the project, following the steps below:

1. Select the project in the SIMATIC Manager.

2. Select the menu command Insert

Station

and then as necessary

Other Station, PG/PC or SIMATIC S5.

Possible result: the selected object is created in the project.

Figure 2-6 Project With Substitute Objects Configured

Attaching Non-S7 Stations to the Subnet

The next step is to assign the substitute objects to the subnet, as follows:

1. Select the required object in the project and select Edit

Object Properties.

2. In the Properties dialog box that is displayed select the ”Interfaces” tab and

click the “New” button (for example “Other Station”.

Result: The New Interface – Type Selection dialog box is displayed.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 221 222

Sem comentários

Siemens S7 Manual do Utilizador Página 61