
Central-Bus
IGS6 GSM module quad band
By adding a GSM module to the control panel, it turns into an independent
alarm unit. The GSM can also work as a back up if the telephone line is cut or
broken. Furthermore, the control panel will be able to send SMS messages to
mobile devices to inform about the actual situation at home. The module can be
also used for 2-way communication or for transmission of information trough
TCP/IP over GPRS.
IRFW6 receiver module
If the receiver module is built into the control panel, it is able to operate 16
wireless devices of the Sintony 60 product range and up to 16 remote controls.
The signal is transmitted in a secured frequency range (868 MHz in Europe, 915
MHz in the US) with encrypted information. In case a frequency blocking or
jamming is detected an alarm signal will be indicated. To overcome transmission
problems an additional receiver module can be mounted externally and
connected to the central bus.
Different plug-in modules and peripherals such as addressable modules for outputs,
voice modules, card readers or external GSM modules are available for professional
installation. The panel feeds, controls and monitors the modules via central-bus, which
can be installed easily in any building.
IAV6-90 two-way voice verification module
The two-way voice verification module gives the control panel the ability to
work as a communication point. It is possible to listen in from outside and verify
real alarms as it is normally used by Central Monitoring Stations (CMS) to
reduce the cost for false alarms. The “listen-in” function can only be activated
from the outside with a security pin code or in case of an alarm. In case of a
medical emergency the operator can directly talk to the person in need.
It can also store 90 sec. of alarm message which can be individually
programmed with the on board included microphone and loudspeaker.
IZE6-04 four wired zone expander module
With this unit 4 additional wired zones can be connected to the Sintony 60
control panel. It can be built in the control panel directly (modular version only)
or external to save cabling via a connection to the terminal block of the inputs.
Maximum 2 modules can be used with one Sintony 60 (e.g. max 16 wired
zones).
IRO6-04 relay output module 4 12V/1A
With this unit 4 additional output relays can be connected to the Sintony
60 control panel. It can be mounted external to save cabling via a
connection to the central bus. Maximum 1 module can be used with one
Sintony 60 (e.g. max. 8 programmable outputs).
Je suis à la recherche d'un technicien pour ma centrale Siemens IC60, je souhaite la désactiver et je ne sais pas faire et je ne trouve pas de sav pour cette centrale d'alarme. Merci par avance de votre retour.