Siemens FIREFINDER-XLS Manual de Início Rápido descarregar pdf (Página 9)

DESCRIPTION 1-5

CHAPTER 1 | FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL

CC-2 Card Cage The CC-2 provides a central point for

mounting up to two circuit card assem-

blies. If a card requires power, it is

applied through the removable terminal

block at the bottom of the cardcage. All

external devices for the card are

connected to the card through the two

removable terminal blocks at the top of

the cardcage.

DLC Device Loop Card The DLC supports one loop (two isolated parallel zones) of up to 252

FireFinder-XLS intelligent field devices as well as device accessories (relay

bases, audible bases, and remote lamps) in any combination. The DLC

initializes, operates, and maintains all devices residing on the loop and

communicates all relevant device and event information, such as alarms and

troubles, to the System CPU. The DLC allows the System polarity insensitive

devices to be connected without generating errors.

The microprocessor controls the on-board isolator to isolate either zone from

the loop if one of them is shorted. When one zone is isolated from the loop,

the other zone will still work.The on-board microprocessor provides the DLC

with the ability to function and initiate alarm conditions even if the main FireFinder-

XLS CPU fails.

PTB Power Termination The PTB filters the power from the incoming AC

Board mains and distributes it to the PSC-12 power supply

and the optional PSX-12 power supply extender.

ZIC-4A Zone Indicating Card The Model ZIC-4A is a zone indicating card that provides notification appliance

circuits. It has 4 outputs that can be configured for Class A or Class B and

control of audible and visual notifcation appliances such as horns, speakers,

bells, strobes, etc. Its outputs can also be configured as connection to

Municipal Tie, Releasing Service per NFPA 12A, 13, and 2001 or as a connec-

tion to a Leased Line remote monitoring circuit.

Each zone can be configured independently for different usages as pro-

grammed in the Zeus tool and can be controlled automatically by program

logic or manually using the PMI.

The ZIC-4A supports synchronized and non-synchronized strobes. This selection

is available in the Zeus tool under the detail properties for each ZIC-4A circuit.

Synchronization across multiple ZIC-4A cards is automatic as a part of the

FireFinder-XLS operating characteristics. Refer to document P/N 315-096363 for a list of

strobes that support synchronization.

HNET

ALARM

CLASS AOPEN

CLASS ARETURN

CLASS AOPEN

TROUBLE

ZONES STATUS

SHORT

CARD FAIL

GND FAULT

HNET FAIL

RESET

POWER

DLC

321

UPPER ROW

(9-16)

LOWER ROW

(1-8)

HNET

GND FAULT

TRBL

ZONE 4 ACTIVE

TRBL

ZONE 2 ACTIVE

ZONE 1 ACTIVE

TRBL

ZONE 3 ACTIVE

CARD FAIL

HNET FAIL

CAN FAIL

RESET

POWER

ZIC-4A

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

Comentários a estes Manuais

Sem comentários

Siemens FIREFINDER-XLS Manual de Início Rápido Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Siemens FIREFINDER-XLS